Icon 2.5 VS internal-reservoir front coilover kit for 2021-2026 Ford Bronco. Not compatible with Bronco Raptor. Aftermarket upper control arms are recommended above 2.5 in. of lift. Part number 48600.
Coilovers are typically replaced in pairs per axle.
Fitment
- 2021 - 2026 FORD BRONCO
- Position: Front
Specifications
- Position: Front
- Lifted height: an aftermarket UCA is recommended.
- Part number: 48600
Features and notes
- Icon Vehicle Dynamics 2.5 VS Internal Reservoir Coilover
- Fully serviceable
- Made in the USA
- Not compatible with Bronco Raptor
- Fitment testing done with ICON & OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible
- Factory UCA's will not align properly past 2.5” of lift. Above 2.5” of lift an aftermarket UCA is recommended
- Bronco Everglades will have lift height range of 1.5-2.5" over stock
- Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it i
- Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
- When running 37" tires crash bar removal may be required but is not recommended
- Recommended crash bars part #42000 on Non-Sasquatch equipped vehicles when running 35" tires
- When running 37" tires use up travel limiters part #611075 in the front
15 in stock